DIY Guide to Pool Table Repair

Although they do not contain moving parts, pool tables can nonetheless require repair after time. The components of a pool table wear out with continual use, just as the parts of any piece of furniture do. Pool table repair might seem overwhelming, but it can actually be quite simple to do in many cases.

Replacing the Felt

Replacing the felt on a pool tale is one of the most common repairs performed. This involves removing the rails and then taking the felt completely off the table. After this, the surface should be thoroughly cleaned to include scraping away adhesive residue. If there are any old staples in the pool table, these should be removed as well. Stretch the felt across the table, using a staple gun or spray adhesive to attach it at one corner. Continue to pull it taught while securing the felt across the entire table. Trim any excess with a utility knife and then replace the rails.

Repairing an Uneven Surface

The surface of a pool table may become chipped or uneven and will need to be smoothed out. For wooden pool tables, this involves using a sander to remove the old stain. After doing so, remove all the dust with a vacuum cleaner before re-staining. Slate tables can be repaired with a special bonding agent designed especially for this purpose; beeswax can be an effective product to use as well. Simply fill in the cracked or chipped area with the product and allow it to dry. It may be necessary to sand the area lightly once it has completely set.

Fixing Worn Table Rails

Pool table rails contain a cushion that makes balls bounce in a certain manner. After being hit numerous times, they sometimes lose some of their effectiveness. To repair them, the rails should be removed from the pool table. The felt can then be pulled back so that the cushions can be removed by hand. Replacement cushions can be purchased at a billiards supply store, and can be easily attached to the rails without any special tools. Some of the old adhesive may need to be removed first, and the cushions might also need to be cut to size in order to produce a custom fit. Once they have been reattached, the rails can then be placed back on the pool table.

Replacing Leather Pockets

Leather pockets can sometimes crack or break if they are exposed to high temperatures. To replace them, remove the screws on the underside of the table that hold their straps in position. Once all the pockets have been removed, the rails should then be taken off the table. In doing so, the pockets will also be removed. Finish removing the pockets from the rails, and then reattach new ones in their place. Replace the rails and put the screws that hold the pocket straps back in their original holes.

When performing pool table repair, it can be helpful for two people to work together, as some of the parts can be difficult to handle. Doing repairs at home is one way to ensure the table stays in great shape while also saving a great deal of money.